> In a message dated 10/1/2006 11:27:09 PM Central Standard Time,
> diggle@clear.net.nz writes:
>> Brake Booster or Vacuum power servo,
>>
>> What car's could I get a brake servo from to install into my 1962
>> TR4.
>>
Dave Massey said:
> Moss and others offer a servo booster that is generic in
> application that
> will take the hydraulic pressure from the master cylinder and boost
> it using a
> vacuum powered servo. This similar to the unit used in the big
> Austin Healey's.
> There are a few imported cars (the old Honda 600 comes to mind)
> which also had remotely located vacuum operated brake boosters
> which operated on the existing hydraulic pressure. Check with your
> knowledgeable junkyard operator....
Regards, Bill
Slightly Classics
Tucson
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|