triumphs
[Top] [All Lists]

Re: [TR] TR6: PDWA centering method

To: Acekraut11@aol.com, one_second_zero@yahoo.com,
Subject: Re: [TR] TR6: PDWA centering method
From: Dave1massey@cs.com
Date: Fri, 30 Jun 2006 13:28:45 EDT
Asked:

  When you unscrew and remove the sender from the PDWA, does it open 
the brake lines to air? In other words, does that method require 
re-bleeding?

Response:

No,  there are two O rings on the shuttle that seal the brake fluid from the 
switch opening.

Follow-up remark:

In fact you know these O-rings need replacement when fluid starts seeping out 
of the switch.

Dave


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>