When you unscrew and remove the sender from the PDWA, does it open the brake
lines to air? In other words, does that method require re-bleeding?
-thanks
Date: Thu, 29 Jun 2006 23:14:35 -0400
From: acekraut11@aol.com
Subject: Re: [TR] TR6: PDWA centering method
Greg,
Since no one else has answered your question, I will chime in. It is
easier to remove the plastic switch and insert a small screwdriver or
awl and recenter the shuttle. Since the opening is so small it pretty
much has to be done blind and sometimes it is hard to feel the movement
of the shuttle but with a little trial and error you should be able to
get it centered easily. The best method to check if it is centered is
to hook everything back up and see if the light goes off.
Cheers,
Aaron
Next-gen email? Have it all with the all-new Yahoo! Mail Beta.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|