Bill Brewer wrote :
> Where my lever shocks on my TR3 mount to the frame, the holes are
> elongated. I am mounting NOS shocks and want them to mount in tight
> holes. How have others fixed this?
Bill ,
I used 10mm X 30mm bolts .These bolts just went through the shocks without
drilling ,
but I had to drill out the frame mounts very slightly , which trued up the
holes .The
advantage of using 10mm bolts , apart from the fact that they are slightly
bigger , is that
once the bolts are fitted , the heads are prevented from turning as they are
locked
against the shock body .
YMMV
Cheers
Mike Kitchener
60 TR3A TS 75178
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|