Message text written by a Wallace
>You could weld washers to the back of the mounting plates.
Regards,
Jim
PS I found some stainless steel socket-head bolts that fit there; I think
they're 3/8 x 24 x 1 1/2". Makes it possible to remove them later. Now
whether SS is acceptable is debatable, but, the concept works.
<
Welding washers sounds easier than my thought to weld up the hole and
redrill - the hard part being getting the holes in the right place.
On stainless steel bolts to mount shocks: I used grade 8 socket head bolts
(black annodized) and anti-sieze. I woudl shy away from using something so
soft as hardware store SS bolts here.
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|