I had a '72 240z once and the carbs should match up just fine(CFM wise as the
240 boasted 150HP from a 150cubic inch block at about 5800RPM(I believe) in a
7000RPM redline stock engine). I saw a B2000 engine once and I could have sworn
the carbs used in it were identical SU types as that of my 240z. I prefer the
SU's over Strombergs. I had a friend that had a '73 240 and that year model had
the Zenith/Strombergs. He had lots of problems with his carbs. His problems
with the Strombergs may have arisen from all the polution crap hangin off the
carbs though. I assume the 4 bolt pattern will match up to your manifold but
maybe not. Good luck.
--
On Tue, 22 Jun 1999 07:03:33 LBPB1 wrote:
>
>Can anyone tell me if the carbs from a Datsun 240Z will work on a GT6? What
>is the CFM? What is the venturi size? Bolt patterns can be changed and
>brackets made. I had a Datsun roadster once and the carbs worked great and
>were easy to adjust. I think they are almost the same but bigger. Since the
>GT is right at 2 liters and the Z is right at 2.5 ............Well thanks in
>advance!
>
>
>PLB3
>
|