triumphs
[Top] [All Lists]

Re: lambda oxygen sensor

To: Egil Kvaleberg <egil@kvaleberg.no>
Subject: Re: lambda oxygen sensor
From: "\"Mr. Mike\" Passaretti" <passaretti@sol.med.ge.com>
Date: Wed, 8 Oct 1997 10:12:10 -0500
Cc: triumphs@Autox.Team.Net
References: <BMSMTP8762645510alinkens@fargo><%O5wO0M5F5@big.kvaleberg.no>
>>>>> "Egil" == Egil Kvaleberg <egil@kvaleberg.no> writes:

    Egil> Haven't tried that. You should try to find an area
    Egil> of sufficient thickness, then drill and tap
    Egil> M18x1.5. Problem is that the area really needs to be
    Egil> flat to get a gas tight seal. So it is probably
    Egil> easier and better to weld a suitable nut to the
    Egil> exhaust pipe, close to the manifold.

How do folks with multi-unit headers or manifolds do this?  Do
you put the sensor past the mix point (6->3->1 or 4->2->1) or
use multiple sensors somehow?  Or do people with headers and
other performance tweaks pretty much not play with this stuff?

                                        Curiously,
                                                        -MM


<Prev in Thread] Current Thread [Next in Thread>