Steve,
I have a set of finned, cast aluminum, TIGER powered by FORD heads on my
Jr's. I can't tell you if they are original or not but they were never u=
ed
before I got them. They have the fins only about 3/4 of the width (as yo=
u
read the words) of the top.
They clear the underside of the bulkhead by an inch or less (if ya really=
want to know I measure them tonight). =
I had to grind off baffles inside to clear my full roller aluminum extrue=
d
1.72 to 1 rocker arms.
If you want I can e-mail you a picture of them in the car so you can see
the clearance.
Regards,
Jim
B9470139
|