spridgets
[Top] [All Lists]

Re: Critique wanted..

To: Jay Fishbein <type79@ix.netcom.com>
Subject: Re: Critique wanted..
Date: Wed, 30 Mar 2005 17:37:51 -0600
Cc: spridgets List <spridgets@autox.team.net>
References: <2D0989D186D44349BE853EE6CFC87AE6CF5600@glitas07.garverinc.local> <4621e34eb7108018b7a546b2365eeb78@sport.rr.com> <424B1BAC.5040607@ix.netcom.com>
On Mar 30, 2005, at 3:35 PM, Jay Fishbein wrote:

> Lester,
> Assuming you are asking about a concours critique for originality:
> - Replace new coil with a period unit. You can find them on ebay.
> - Wiper motor s/b black krinkle finish. You can buy this paint at a 
> hard
> ware store.

Got some.  The other Lucas wipers I have (similar unit used on old 
SAABs) were just black.

>     Plate covering wiper cable and the round switch s/b cad plated.
> - Heater - cad plate the clips.

Yup, I thought about both of those but was concerened about making the 
clips too brittle and the wiper non-functional

> - Install a hydraulic clutch line. You will need this for changing 
> gears.

That would explain that nasty noise when I shift..  Gonna keep that 
part as is, Datsun tranny ya know

> - master cyl cap s/b metal.

Is that going to be eBay as well?

> - oil filler cap is not corrrect type. Look for one with indents like
> the original gas cap.
hmm.. it has indents with oil company names on it.  Came with the car 
with the valve cover.  Bad picture on my part or am I missing something 
else?

> - replace band type clamp witih wire clamps like you have on the
> breather tube.

Got it..

> - Spark plug wires s/b cut to correct length and remove the rubber
> boots. Find a set of original copper leads.

What color wires?  What kind of boots?

> - battery cable s/b black.

That one I knew I just had a spare on hand and wanted it to go.

> - the metal plate attached to the solenoid holding the tach cable is 
> not
> original to a bugeye, but from a Mk II.

Ok, the pictures in the factory Sprite manual (Blue vinyl, gold 
lettering) I have showed one.  It is, in fact, my own fabrication from 
that picture.

> - tranny s/b engine color.

Smooth case tranny in the box is.. ;-)

> - you need an engine plate which can be sourced from Clark Spares in 
> PA.

Already on it's way!

> - get a side entry Lucas dizzy cap.

Got one of those as well.  Looks like a plug re-wiring is in order..

> - try to find an original 7lb radiator cap.

Oi..  that may be going too far unless there are NOS ones about..

> - R View mirror. Hard to tell but that looks like it could be one from 
> a
> Mk II You want the one with thte glass held in place by clips.

Could be from a go-kart for all I know, but the glass is NOT held in by 
clips..
>
> All of these comments pertain to originality and are not meant to be
> anything other than constructive criticism as you requested. The car
> looks great. Send more pics as you progress.

Thanks!  Your comments are taken in that vein and GREATLY APPRECIATED!!

Am I trying to make a concours car?  Not exactly but I do want it close 
to original in case I have to part with it.  Primarily a sunny day 
driver.  In this part of Louisiana that means a few days in Feb to 
April and a few days from Oct to Jan..

Lester

>
> -- 
>
> jay fishbein
> wallingford, ct
> http://home.ix.netcom.com/~type79/ 
> <http://home.ix.netcom.com/%7Etype79/>
>
>
> Lester Ewing wrote:
>
>> Ok,
>>
>>     folks who wanted and received pics, please make any comments
>> regarding what's wrong or could use improvement.  I really do want a
>> serious critique, other than the heater vent line which is all that I
>> could find.  I know that everyone was specific in their critique of
>> the eBay or was it Barrett/Jackson car that went for $ 16k and I would
>> like the same approach here.





<Prev in Thread] Current Thread [Next in Thread>