spitfires
[Top] [All Lists]

RE: Gauge/voltage stabilizer questions

To: spitfires@autox.team.net
Subject: RE: Gauge/voltage stabilizer questions
From: doug@dougbraun.com
Date: Mon, 08 May 2006 10:52:46 -0400
I would start by checking the sender.  If the gas gauge reads reasonably, it 
probably isn't
the voltage regulator.  A new sender is about $7 or 8 here; at that price I 
would just go and replace it.
If the gauge itself were messed up, I would expect it to read low or not at all.

Somewhere I once saw a spec for the hot and cold resistance of the sender, but
it does not appear to be in the factory service manual.

Doug Braun
'72 Spit


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>