| To: | Jimmie Mayfield <mayfield+shoptalk@sackheads.org> definitions=2019-12-22_02:, , signatures=0 malwarescore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1011 mlxscore=0 mlxlogscore=907 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1908290000 definitions=main-1912220142 |
|---|---|
| Subject: | Re: [Shop-talk] Making a door thinner |
| From: | Pat Horne via Shop-talk <shop-talk@autox.team.net> |
| Date: | Sun, 22 Dec 2019 09:38:45 -0600 |
| Cc: | Shop-talk@autox.team.net |
| Delivered-to: | mharc@autox.team.net |
| Delivered-to: | shop-talk@autox.team.net |
| References: | <e324b134-2837-148f-fd0d-929dc36ab142@sackheads.org> |
Probably should check for metal fasteners too Pat Horne We support Habitat for Humanity > On Dec 22, 2019, at 9:36 AM, Jimmie Mayfield via Shop-talk > <shop-talk@autox.team.net> wrote: > Contact a local cabinet shop and ask them how much they'd charge to run your door through their wide-belt sander a few times to take it down to 1 3/8". Shouldn't take long at all. They might balk if these doors are already painted/finished (it might gum up their sanding belt) so you might need to strip the finish before you drop the doors off but contact them and see what they prefer. _______________________________________________ Shop-talk@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.96 Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com _______________________________________________ Shop-talk@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.96 Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Shop-talk] Making a door thinner, Jimmie Mayfield via Shop-talk |
|---|---|
| Next by Date: | Re: [Shop-talk] Making a door thinner, Jim Stone via Shop-talk |
| Previous by Thread: | Re: [Shop-talk] Making a door thinner, Jimmie Mayfield via Shop-talk |
| Next by Thread: | Re: [Shop-talk] Making a door thinner, Jim Stone via Shop-talk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |