I'll throw in another recommendation for some sort of insert or
rethreading one size up. I have used JB Weld a lot, and while it's good
as a filler and in compression, my results with it in shear or tension
have not been good at all.
John T. Blair wrote:
> I'm working on a '40 Packard's carb. The float bowl cover is held on
> with 5
> screws. 3 of the holes (in the bottom part of the carb - float bowl) are
> stripped.
>
> So I'm looking for an easy way to fix them.
>
> I've done a google search, and found 2 basic methods:
>
> 1. use a heli coil
>
> 2. us JB weld with soap on the bolt. Once the epoxy has cured, unscrew
> the screw.
>
> Wondering what you guys have done?
>
> John
>
> John T. Blair WA4OHZ email: jblair1948@cox.net
> Va. Beach, Va
> Phone: (757) 495-8229
>
> 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
> 75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
> 65 Rambler Classic
>
> Morgan: www.team.net/www/morgan
> Bricklin: www.bricklin.org
>
> If you can read this - Thank a teacher!
> If you are reading it in English - Thank a Vet!!
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|