shop-talk
[Top] [All Lists]

Re: [Shop-talk] u-verse

To: eric@megageek.com
Subject: Re: [Shop-talk] u-verse
From: Pat Horne <pat@hornesystemstx.com>
Date: Tue, 19 Jan 2010 16:13:33 -0600
I agree with Moose.  Another factor is how far North you live. The 
satellites you are getting signal from are over the equator, so the 
farther North you are, the less signal there is. It also needs a more 
precise aiming that it does farther South.

I haven't looked in to how the lower angle to the satellite affects the 
signal. With more horizontal signal paths the signal is closer to 
man-made noise sources on the ground.

Peace,
Pat

Thusly spake eric@megageek.com, On 1/19/2010 3:42 PM:
> David asks?
>
>   
>>    Interesting.  I don't see how dish location can avoid weather
>>     
> interference,
>   
>> unless you have a really effing tall chimney
>>     
>
>
> The problem with most installations is that the dish is set on a pole,
> which is extended from a flat (or pitched) surface.  This means that the
> dish is effectively a tall sail in all windy conditions.  Over time, the
> wind can move (albeit every slightly) in a direction.  Not to mention that
> it vibrates the dish when it is windy.
>
> Also, with nothing protecting if from above, it is open to all the
> elements.  Placing it on the side of a building with a slight overhang
> will do wonders.
>
> Between these two factors, most of the problems can be eliminated.
>
> (I thought I had a picture of my installation on my website, but I can?t
> find it now.)
>
> Seriously, it makes a world of difference.
>
>   

-- 
Pat Horne, Owner, Horne Systems 
(512) 797-7501 Voice            5026 FM 2001
Pat@HorneSystemsTx.com  Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Suggested annual donation $12.96


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>