[Top] [All Lists]

RE: Lathe Level question

To: "''" <>,
Subject: RE: Lathe Level question
From: Gil Fuqua <>
Date: Tue, 26 Sep 2000 08:21:08 -0500

Setting up a lathe and getting it precisely level is an important part in
maximizing the accuracy of your lathe.  The lathe needs to be level on its
base end-to-end and side-to-side, otherwise you will have a twist or bow in
the frame that will affect accuracy.

See the excellent article on getting a lathe leveled at:

Gil Fuqua, Jr., CPA
Corporate Communications, Inc.
523 Third Ave. S.
Nashville, TN  37210


<Prev in Thread] Current Thread [Next in Thread>