Re: Starter wire

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

If you have the pre-engaged starter with attached solenoid then it *should*
be fairly obvious, that is if it hasn't snapped off flush with the plastic
moulding.

Here's hoping ...

----- Original Message -----
From: "Eric" <eric@erickson.on.net>
To: "MG List" <mgs@autox.team.net>
Sent: Monday, June 14, 2004 2:29 PM
Subject: Re: Starter wire


> So, where the heck is that spade terminal ...