When I replaced the tank on my 1980 MGB, I sprayed the top (and bottom) with a
black rubber undercoating. I think the right method would have been to strip
the tank to bare metal and use the zinc coating from Eastwood, but I didn't
know about it beforehand. Eastwood also sells something to coat the inside of
the tank, if you really want to protect it.
--Steve
-----Original Message-----
From: Menno.Meijer@ict.nl [mailto:Menno.Meijer@ict.nl]
Sent: Thu 4/24/2003 5:31 AM
To: mgs@autox.team.net
Subject: How to coat a new fuel tank
... I'm planning to replace the fuel tank on my '63B. What kind of
coating (outside of fuel tank) should I use? (To me, durability
is more important than appearance :-) ...
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|