> Eastwood carries a zinc based paint that they sell as
> specially made for
> coating the outside of gas tanks. They claim the zinc will
> impede any
> rusting. Reading the literature, the application calls for
> applying it to
> bare metal for best results, and since my tank came with a
> finish on it
> already, I didn't want to strip it down.
Except won't you run into a similar situation with POR-15? The POR-15
will only be adhering to the paint applied by the manufacturer, rather
than the metal.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|