> Perhaps you should look into padding the mountings
>of your fuel pump?...
If you do, and you don't have a separate ground, be sure to ground the
pump to the body.
I used a piece of conveyor belt material to insulate mine; helped some
but the material should have been softer. A friend suggested using a set
of GM wiper motor mounting grommets. New ones can be had in the "Help"
section of odds and ends in almost any US chain parts store for just a
couple of bucks.
Rich Arnold
Council Bluffs, Iowa
'74.5 RB MGB "Maggie"
'78 Chevy Half-Ton "Waltzin' Matilda"
'79 Midget "Miss Molly"
richard.arnold@juno.com or rdarnold@neonramp.com
|