No. It's definitely the joint between the "gooseneck" and the thermostat
housing. I just took it apart again, cut a new neoprene-cork gasket, put a
bead of RTV on both surfaces, and tried to NOT over tighten it. I'll pour in
some water in the morning and see what happens.
John
On Sun, May 29, 2011 at 9:46 PM, Lew Palmer <lpalmer@roundaboutmanor.com>wrote:
> Or a leaky seal in the water pump itself?
>
> Lew Palmer
>
> -----Original Message-----
> From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net] On
> Behalf Of Mark J Bradakis
> Sent: Sunday, May 29, 2011 6:29 PM
> To: MG T List
> Subject: Re: [Mg-t] Making a gasket
>
> And are you sure it is the joint that is leaking, and you are not
> having a porousity issue with the housing?
>
> mjb.
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/lpalmer@roundaboutmanor.com
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/johnsfolly@gmail.com
>
>
--
*Raising money for children's cancer research by driving *
*the cross-country Rallye to Reno in a '53 MG TD*
**Read about it at: MG Drive for CURE <http://www.kidsCURE.blogspot.com>
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|