[Top] [All Lists]

Re: Anybody there?

Subject: Re: Anybody there?
Date: Mon, 29 Nov 2004 11:47:41 EST
In a message dated 11/28/2004 10:39:42 PM Pacific Standard Time, writes:

> I never shimmed the body tub.
> First set the tub on the frame and bolt it down before setting the
> doors.
> I usually have been able to fit the doors by bending the hinges.
> Years ago, I had a body man, worked for a car company, tell me that
> quite often they just put a timber und the door and lifted to raise a
> sagging door.  Use a block of wood under the door so you don't bend the
> lip.  So, quite often that will work.
> I have also placed packing under the body hinges, and or, the door
> sticker plates in the tub.  I have never used packing on the door
> itself.
> Regards,
> Blake

Hi Blake, thanks for this to your moosescum address is 
bouncing back........

///  unsubscribe/change address requests to  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>