Google "half moon wrench" or similar terms. You may need to cut the open
end.
John
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Simmen
Sent: Thursday, August 24, 2017 2:14 PM
To: healeys at autox.team.net
Subject: [Healeys] Tool for removing SU carbs
Having just received the Sept. 2017 issue of Healey Marque Magazine, I
quickly read the Technical Service Bulletin article Big Healey, Big
Carburetors. I will be mounting my rebuilt carbs in the next week or two.
On page 39 it show a picture of "Special tools required for nut removal"
(see attached). Although I have a large supply of the tool on the left, and
the tool on the right is always on my workbench, I am in desperate of need
of the tool in the middle. Does anyone have a part number and source that I
might be able to purchase this wrench.
Thanks in advance for your help.
Bob
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170825/c1e94bb5/attachment.html>
|