Bob,
On my BJ8, I can work my arm and wrist in the shape of the middle tool and
get under the carbs from the outside to reach the inside bolts. It's
fiddly, but doable.
- Tom
On Thu, Aug 24, 2017 at 5:13 PM, Bob Simmen <rsimmen at nc.rr.com> wrote:
> Having just received the Sept. 2017 issue of Healey Marque Magazine, I
> quickly read the Technical Service Bulletin article Big Healey, Big
> Carburetors. I will be mounting my rebuilt carbs in the next week or two.
> On page 39 it show a picture of ?Special tools required for nut removal?
> (see attached). Although I have a large supply of the tool on the left,
> and the tool on the right is always on my workbench, I am in desperate of
> need of the tool in the middle. Does anyone have a part number and source
> that I might be able to purchase this wrench.
>
>
>
> Thanks in advance for your help.
>
>
>
> Bob
>
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/ah3000me at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170825/830f04ec/attachment.html>
|