https://store.snapon.com/Hand-Tools-C700010.aspx
The wrench you are looking for should be available through the link above.
_____
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys
Sent: Friday, August 25, 2017 12:34 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Tool for removing SU carbs
Any decent tool store will have a collection of various sizes of this wrench
in closed ended form, it is called a starter wrench around here. It is easy
enough to grind the slot in one end.
Kees Oudesluijs
Op 24-8-2017 om 23:13 schreef Bob Simmen:
Having just received the Sept. 2017 issue of Healey Marque Magazine, I
quickly read the Technical Service Bulletin article Big Healey, Big
Carburetors. I will be mounting my rebuilt carbs in the next week or two.
On page 39 it show a picture of "Special tools required for nut removal"
(see attached). Although I have a large supply of the tool on the left, and
the tool on the right is always on my workbench, I am in desperate of need
of the tool in the middle. Does anyone have a part number and source that I
might be able to purchase this wrench.
Thanks in advance for your help.
Bob
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170825/2e5ead69/attachment.html>
|