There isn't enough there to see with out looking at it personally.
Are the any pits or chips on the 1st gear slider. It so then it needs
replaced
The reverse gear does not look to bad. The shifter rods are normal
you just need to remove the high parts and make sure the slider rod
moves in the center rod.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Aug 13, 2009, at 2:41 PM, Tadeusz Malkiewicz wrote:
> I have just opened my gearbox, photos are here: http://tinyurl.com/
> m96txy
>
> The only problem I had was that the reverse jumped out of gear.
> Otherwise
> all was fine. When I opened it, it seems that the:
> - laygear
> - reverse gear
> - first gear
>
> Are not in the best shape.
>
> Can anyone tell me if all of them need replacement or maybe I can
> still
> leave the first gear in?
>
> Who does the laygears? I saw them offered by Denis Welch and AH
> Spares do
> far..
>
> Does anyone see a reason for the reverse jumping out of gear?
>
> Why do I see these strange depressions on the selector shafts
> http://tinyurl.com/nx859m ? (there are some small grinding marks
> for which
> I take the blame)
>
> The reverse gear, when geared, looks like this: http://tinyurl.com/
> nas9sy
> Why doesn't the reverse gear go all the way to the left (or down on
> the
> picture?
>
>
> Many thanks for help,
>
> Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|