Bill, Rich and others, many many thanks!
I checked the fork play at first, and here's what I found:
Large 1-2 selector: 0.5mm - the selector looks slightly worn, the outer
front face has seen contact with the synchro.
Small 3-4 selector: 0.6mm - no severe wear
Reverse selector: 0.85mm - no wear.
When reverse is engaged, the distance between the reverse shaft holder (with
the bolt) and the gear itself is 4.65mm.
Does anyone perhaps has the gearbox open to check these measurements?..
Many thanks, Tadek
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|