When I did mine, I removed the steering box and steering column from the car
and took the whole assembly to a shop where they pressed the steering arm
off for me.
HTH,
Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: healeys-bounces+schauss=worldnet.att.net@autox.team.net
> [mailto:healeys-bounces+schauss=worldnet.att.net@autox.team.net] On Behalf
> Of Bob Haskell
> Sent: Friday, May 02, 2008 6:53 PM
> To: jjkbj7@yahoo.com
> Cc: healeys@autox.team.net
> Subject: Re: [Healeys] Steering Arm Removal
>
> John,
>
> With the puller installed and tightened a bit, rap the side of the arm at
> (the shaft end) with a ball peen hammer.
>
> Bob
>
> John Kuzman wrote:
> > I need some guidance on the removal of the steering arm from the
> > steering box on my BJ7. I am attempting to replace the seal.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as schauss@worldnet.att.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|