Well there certainly are a lot of opinions on this one.
Patton , if you want a Securon part number of an nice 3 point shoulder unit
let me know and I will get it off my parts box. These are for front seat
only of course.
I special ordered a set from Moss after winning a WRONG set on ebay. What
you don't want is a belt that you have to hang high on the inner door shut
plate face. Our cars aren't set up for 3 point belts like that. (similar
to what our daily drivers have). You need one that bolts in the back some
where like the wheel well , then on the floor between the door the the
seat and then the latch half is secured to the floor or trany tunnel area on
the other side of the seat.
Mark
----- Original Message -----
From: "Patton Dickson" <57healey@gmail.com>
To: "Healey List" <healeys@autox.team.net>
Sent: Tuesday, October 31, 2006 3:25 PM
Subject: Seat Belts
> My wife just ave me a deadline to have the 100-Six ready for taking
> the girls to look at Christmas lights in the Healey. That means I
> have seven weekends to finish the car. I have most of the parts, it's
> just installing them, and the biggest project is installing the
> carpet, seats and seat belts.
>
> Does anyone have a good set of photos showing how to install front and
> rear seat belts in a early 4 seat car. I want to incorporate shoulder
> belts on the driver and passenger seats, but will do lap belts for the
> girl's 5 point car seats.
>
> Thanks in advance.
>
> Patton
|