WRT the dowel bolts,
I always understood they are at 1 and 7 o'clock when viewed while sitting
in the cockpit facing forward.
Am I wrong on this?
Jim
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: <ahy3000@comcast.net>; "Healey List" <healeys@autox.team.net>
Sent: Monday, August 21, 2006 9:53 PM
Subject: Re: Replacing clutch on BJ7
"> Important note: Two of the bell housing bolts have a special machined
> shoulder. They serves as alignment dowels that must go back into the
bell
> housing to engine mounting plate at 11 and 5 o'clock positions
respectively. "
> Rich Chrysler
|