Re: [Roadsters] Crank Pulley

["Gary and Cindy Ault" <aultgc@att.net>]

John,

My personal experience wth Loctite Red is that it holds very well, but parts 
assembled with it can be taken apart without heat.  Blue is even weaker.

Gary

----- Original Message ----- 
From: "John F Sandhoff" <sandhoff@csus.edu>
To: <datsun-roadsters@autox.team.net>
Sent: Wednesday, November 23, 2011 2:35 PM
Subject: Re: [Roadsters] Crank Pulley


>> if you still cant get the torque high enough, put red lock tite on
>> the threads and get it as tight as you can.
>
> Ummm, this assumes you're never, ever taking it apart again, right?
> Doesn't red loctite require heating to 500 degrees to break the bond?
>
> -- John
>     John F Sandhoff   sandhoff@csus.edu   Sacramento, CA
> ________________________________________
>
> datsun-roadsters@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net
________________________________________

datsun-roadsters@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums