datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] Stereo/speakers

To: <datsun-roadsters@autox.team.net>, <vulforge@aol.com>
Subject: Re: [Roadsters] Stereo/speakers
From: "Gary and Cindy Ault" <aultgc@att.net>
Date: Mon, 25 Apr 2011 21:56:47 -0500
Russell,

I haven't had time to rip the Dynamat out of my '67 yet.  It has caused more 
problems than it's worth.

When I replaced the carpeting in my '66, I had a trim shop custom fit floor 
carpet in one piece per side.  If ever gets really wet, out come the seats, 
and out comes the carpet in one piece.  It doesn't bunch up like every other 
two-piece floor carpet kit I have seen, either.

Gary

----- Original Message ----- 
From: <vulforge@aol.com>
To: <datsun-roadsters@autox.team.net>
Sent: Monday, April 25, 2011 7:09 PM
Subject: [Roadsters] Stereo/speakers


>I am halfway through replacing the interior in my early '67 and adding a
> stereo system.  Thought I would run my plans by the list and ask for input 
> and
> ideas.  I have already scraped down the floor pans and painted them with 
> POR
> 15. I plan to line pretty much the whole interior with a Dynamat style 
> (Mega
> Mat brand) sound deadening material.  Then it will get new pads, carpets,
> panels and a refurbished dash.  My plan for the stereo is to use a
> vintage-style cassette player head unit with a 4 channel amp and 4 5.25"
> speakers and the headrest speakers in a set of Miata seats.  I plan to 
> mount
> the speakers in the diagonal brace under the dash on both sides, and the
> lowest pillar holes behind the seats.  The amp will go under the dash on 
> the
> passenger side where the speaker box used to be.
> Might there be any potential problem with cutting the holes for the 
> speakers
> in those locations?  I will need to cut two 5" holes in the diagonal 
> braces
> and enlarge the pillar holes from 4.25" to 5".  Do the speakers in the 
> rear
> holes need an enclosure behind them?  Any problem with running the 
> headrest
> speakers in parallel with the front set?  That would be one 5.25" and 2
> headrest speakers on each front channel.  I am looking at Pyle brand 
> speakers
> and a Legacy 300 watt 4-channel amp.  Any advice or ideas would be
> appreciated!
>
>
> Russell Criswell
> Vulcan's Forge
> 3936 Broadway
> Kansas City, MO
> 64111
>
> 816-931-6303
> 816-931-9378 fax
> 877-531-1046 toll-free
> www.vulcans-forge.com
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net 
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>