Gordon Glasgow wrote:
> http://www.cranecams.com/ignition1/electoc.htm
> I just put a Crane HI-6 ignition and MSD Blaster 2 coil in my car, and believe
> me, that's a HOT spark! We were pulling plug wires off the distributor cap
> (don't try this by hand) to see if each cylinder dropped the same amount, and
> the spark was coming about 1" to 1 1/2" out of the top of the distributor cap
> before it would let go. And it was a huge white arc making a loud SNAP, not
>just
> the usual little tick. You could probably spot-weld with it.
>
> Gordon Glasgow
> Renton, WA
>
So Gordon,
Do you have a breakerless distributor or does it have points.
Bob
Moscow.
|