Hi Sid,
Would be most interested. Thanks
Guy
sidney raper wrote:
> Bob,
>
> I had found a web site a while back that had a program to help set a
> baseline from which to start your jetting. When I get home, I will let you
> know the URL (assuming that I can find it again!) If the list is
> interested, I will post it to the list.
>
> Sid
>
> >From: bob_wilson@agilent.com
> >Reply-To: bob_wilson@agilent.com
> >To: datsun-roadsters@autox.team.net
> >Subject: 40mm Solex Jets for stroked 1600
> >Date: Fri, 2 Mar 2001 08:43:33 -0700
> >
> >Hi List,
> >
> >I just finished installing two 40mm Solex carbs onto my newly stroked 1600
> >(so it is now effectively a 2000cc sized engine. The Solex manual shows a
> >choice of various sized jets that can be interchanged to make these carbs
> >work correctly for various sized engines. But they don't say what you need
> >for what sized engine.
> >
> >Has anyone done this "Solex on a stroked 1600" and therefore knows what
> >sized the jets should be? It could save me a bunch of work if I start with
> >jets that are close to the right size.
> >
> >The engine is still in my shop, but hopefully soon will be back in the car.
> >
> >
> >Thanks,
> >
> >Bob Wilson
> >1970 1600 #28383
>
> _________________________________________________________________
|