Bob,
I had found a web site a while back that had a program to help set a
baseline from which to start your jetting. When I get home, I will let you
know the URL (assuming that I can find it again!) If the list is
interested, I will post it to the list.
Sid
>From: bob_wilson@agilent.com
>Reply-To: bob_wilson@agilent.com
>To: datsun-roadsters@autox.team.net
>Subject: 40mm Solex Jets for stroked 1600
>Date: Fri, 2 Mar 2001 08:43:33 -0700
>
>Hi List,
>
>I just finished installing two 40mm Solex carbs onto my newly stroked 1600
>(so it is now effectively a 2000cc sized engine. The Solex manual shows a
>choice of various sized jets that can be interchanged to make these carbs
>work correctly for various sized engines. But they don't say what you need
>for what sized engine.
>
>Has anyone done this "Solex on a stroked 1600" and therefore knows what
>sized the jets should be? It could save me a bunch of work if I start with
>jets that are close to the right size.
>
>The engine is still in my shop, but hopefully soon will be back in the car.
>
>
>Thanks,
>
>Bob Wilson
>1970 1600 #28383
_________________________________________________________________
|