Be very careful of the aftermarket sheet metal. Most of it is really hard
to fit up right, and will give you nightmares! I've had plenty of those!
Paul Strassmaier
67 2000
-----Original Message-----
From: Art Department [mailto:qcimages@ix.netcom.com]
Sent: Tuesday, March 30, 1999 5:16 PM
To: datsun-roadsters@autox.team.net
Subject: Re: rockers
>You get what you pay for , buy new ones
>
>Mike Kerr
I hear that, but I got to think that when you can buy "Factory NEW rockers
from Nissan" for a 510 a the price of $6-$10ea that the quality in them is
the same as the Factory roadster rockers except the roadster rockers are 4
to 5 times the cost (supply and demand!!!). Not trying to cut Roadster
parts houses out of the loop but I have come across other parts that are
aftermarket and they seem to be equal quality parts at HALF the price as
they are made for other cars and not specific to roadsters only, demand is
higher because of the other vehicles and cost is less for us. Maybe someone
has found a match for rockers?
Craig
69 2000
|