Re: Kevin Riggs asks about gasket making-
I recently bought a hole punch set at a leather store
to assist in the fabrication of impossible-to-locate
Riley water pump gaskets. I got the punch handle & 6 or
7 interchangeable punch tips for about $8. Works like a
charm for the many small bolt holes, tho you can also
use a bullet casing if you just happen to have one lying
around.
One other thing I noticed while I was at this
store was very large (~1" dia.), one-piece hole punches
that now that I'm thinking about it would probably work
well for cutting out intake/exhaust port holes. I believe
they were about $10. Daren says check it out -
cheers-
dstone@sc9.intel.com
|