autox
[Top] [All Lists]

Re: electric impact wrenches

To: schumi@vcn.bc.ca, autox@autox.team.net
Subject: Re: electric impact wrenches
From: CURTIS_EAMES@HP-Vancouver-om1.om.hp.com
Date: Wed, 3 Feb 1999 00:00:38 -0800
     Date: Mon, 1 Feb 1999 14:21:51 -0800 (PST)
     From: Wes Shew <schumi@vcn.bc.ca>
     Subject: Re: electric impact wrenches
     ---------------------------------------------------------------------
     Now I have a cordless screwdriver, much more compact/lighter to carry
     around than a drill. Only problem now is to find a 1/4" shank/adapter 
     to fit onto a socket for my 19mm lugs? Suggestions? Otherwise I've be 
     doing OK for the past 12+ years using a "X" wheel wrench.
     
     - --
     Yours in motorsport, Wesley E. Shew   [ macher ;-) ]
     ---------------------------------------------------------------------
     
     Wes,
     
     I bought a 3/8" drive deep well 19mm socket and found a 1/4" hex shaft 
     to 3/8" adapter at Sears. The hex shaft fits into the lightweight 
     Sears Craftsman cordless drill. Of course I use a torque wrench for 
     the 94 ft-lb Porsche lug nuts.
     
     Curtis Eames
     928 GT


<Prev in Thread] Current Thread [Next in Thread>