Joe- what is the product called?
on 3/8/03 7:54 PM, jrich@attbi.com at jrich@attbi.com wrote:
> I used a product by gunk. It comes in a one-gallon can (like a paint can) with
> a parts basket. IMHO the stuff worked great and the carbs looked outstanding.
> I
> did the first one with traditional methods and basically dumped the second one
> in the can and closed the lid. I waited a few days, took it out and it needed
> very little additional cleaning.
>
>
> Joe
>> While I'm waiting (patiently) for my weldor to get my diff reinforcement
>> brackets done, I am rebuilding the carbs. I have done this job on several
>> cars, but this time I want them to look as good as they run.
>>
>> I'm not interested in powder coating them. Does anyone have tips on cleaning
>> the carb bodies and then preserving the look? Is there something that I can
>> soak them in or is a wire brush and lacquer thinner the way to go?
>>
>> Thanks,
>> Peter
>> '68 TR250
|