Good morning,
I can't seem to get my hands on the four "nails" or "pins" that hold the
retaining spring clips on the rear break shoes. TRF and Moss don't seem to
offer them any more. Went to the parts store and they couldn't match them
either. The original pins are 1 1/4" and the closest the could come up with
was 1 1/2". Also, there are three clips that hold the rear brake cylinder to
the backing plate. I could only get my hands on two of the pieces. The
"distance piece" was not available. Can I get away with two pieces or is there
another fix?
Thans in advance,
John Z
'76 in the air
|