[TR] TR6 front camber shims

[Randy and Valerie DeRuiter]

Lee-

After you loosen the wishbone brackets try a small pry bar between the lower spring plate and the frame- that should take the pressure off the shims and let you add or remove.

Randy
Sent from my iPad

> On Nov 9, 2025, at 10:10 PM, lee at automate-it.com wrote:
>
> I’m adjusting front camber. The official method is “slacken the nuts securing lower wishbone brackets“ and “remove or add shims as necessary”.
>
> Without removing anything other than the wheel, there’s only tight access, and I can’t get the shims to budge. Any suggestions?
>
> Thanks,
> Lee
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com