[TR] TR6 front camber shims

[DAVID MASSEY]

Even with the nuts slackened the spring is pressing down on the bracket causing it to rotate and apply pressure on the shims making them difficult to remove or insert.  You might try prying on the lower wishbone arm with a large screwdriver or something similar to relieve the pressure on the bracket to allow insertion and/or removal of the shims.
Dave 


 

    On Sunday, November 9, 2025 at 10:34:03 PM CST, <lee at automate-it.com> wrote:   

 I’m adjusting front camber. The official method is “slacken the nuts 
securing lower wishbone brackets“ and “remove or add shims as 
necessary”.

Without removing anything other than the wheel, there’s only tight 
access, and I can’t get the shims to budge. Any suggestions?

Thanks,
Lee
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251110/becf82d6/attachment.htm>