[TR] TR4 Front Fender Head Light Bucket mounting dimensions needed

[Brad Kahler]

A little background.  TR6s use rivets to hold the headlight buckets to the
fenders, TR4s use push-in clips and screws.  I plan on eliminating the
rivets and switching to the same fasteners as were used on TR4s.  The 4s
used push-in clips that reside in a square/rectangular opening.  I need the
dimensions of that square/rectangular opening.

I've already got the push-in clips and one dimension is pretty obvious.
However the other is a little harder to discern what it should be and I'd
like to do it right the first time!

If someone could measure one of your spare fenders I would greatly
appreciate it.

Thanks,

Brad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230628/a78b54ae/attachment.htm>