[TR] TR4 Front Fender Head Light Bucket mounting dimensions needed

[Michael Burdick]

Hi Brad - they are square, and I measured one on a replacement panel I have
on my shelf (purchased from TRF about 10 years ago) at 13/32nds.

Hope this helps,
Mike

On Wed, Jun 28, 2023 at 9:27 AM Brad Kahler <bkahler1 at gmail.com> wrote:

> A little background.  TR6s use rivets to hold the headlight buckets to the
> fenders, TR4s use push-in clips and screws.  I plan on eliminating the
> rivets and switching to the same fasteners as were used on TR4s.  The 4s
> used push-in clips that reside in a square/rectangular opening.  I need the
> dimensions of that square/rectangular opening.
>
> I've already got the push-in clips and one dimension is pretty obvious.
> However the other is a little harder to discern what it should be and I'd
> like to do it right the first time!
>
> If someone could measure one of your spare fenders I would greatly
> appreciate it.
>
> Thanks,
>
> Brad
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/salty1249y@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230628/69b64598/attachment.htm>