<div dir="ltr">A little background.  TR6s use rivets to hold the headlight buckets to the fenders, TR4s use push-in clips and screws.  I plan on eliminating the rivets and switching to the same fasteners as were used on TR4s.  The 4s used push-in clips that reside in a square/rectangular opening.  I need the dimensions of that square/rectangular opening. <div><br></div><div>I've already got the push-in clips and one dimension is pretty obvious.  However the other is a little harder to discern what it should be and I'd like to do it right the first time!  </div><div><br></div><div>If someone could measure one of your spare fenders I would greatly appreciate it.</div><div><br></div><div>Thanks,</div><div><br></div><div>Brad</div></div>