[TR] Looking for information on the connector polarity on a positive ground voltage stabilizer.

[DAVID MASSEY]

 The OE heated bimetal device is not polarity sensitive and would be connected the same in either positive or negative ground applications.  

I can't help if you have a new, electronic version.


 
Dave 


 
 
-----Original Message-----
From: Dave Connitt <dconnitt at fuse.net>
To: Triumphs <triumphs at autox.team.net>
Sent: Mon, Oct 17, 2022 12:11 pm
Subject: [TR] Looking for information on the connector polarity on a positive ground voltage stabilizer.

Can anyone tell me anything about the electrical connectors on a positive ground voltage stabilizer. For example on a negative ground voltage stabilizer, the “B” (battery) input is 2 male .250” push on tabs and the “I” (instrument) output is 2 female .250” push on tabs.
Thanks,
Dave Connitt

Sent from my iPhone
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221017/be2e570d/attachment.htm>