[TR] TR3/4 Rear Wheel Studs

[William Brewer]

      Just to clarify, the broken stud was a screw-in stud and not the 
pressed-in stud.

661-320 STUD, disc wheel | Moss Motors 
<https://mossmotors.com/stud-disc-wheel-4>

      In this rare occurrence, I don't need any other parts at the 
moment and can't make the minimum Moss order. I guess that I can load up 
on things that I may need in the future...

      Does anyone have a spare laying around? The disk wheel studs have 
16 or 17 threads on the outside. The wire wheel studs have about 12.

      -Bill Brewer



On 6/1/2022 10:58 AM, William Brewer wrote:
>      I just snapped off a rear wheel stud on my TR3. It twisted and 
> snapped about 3 threads into the rear axle flange. Question: With the 
> studs out is it a through hole to the back of the axle flange or is it 
> a bottomed hole? I need to get an EZ-out in there and want to make 
> sure that it is okay to drill straight through.
>
>      Also, does anyone have a TR3 or TR4 disk wheel stud that they can 
> spare that they can give/sell me?
>
>      Thanks,
>
>      -Bill Brewer
>
>      Morro Bay, CA
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220601/ea98df1e/attachment.htm>