[TR] TR3/4 Rear Wheel Studs

[auprichard uprichard.net]

What type do you need? Wire or disk?

Andrew Uprichard
Jackson, MI

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of William Brewer
Sent: Wednesday, June 1, 2022 5:21 PM
To: Triumph List <triumphs at autox.team.net>
Subject: Re: [TR] TR3/4 Rear Wheel Studs


     Just to clarify, the broken stud was a screw-in stud and not the pressed-in stud.

    661-320 STUD, disc wheel | Moss Motors<https://mossmotors.com/stud-disc-wheel-4>

     In this rare occurrence, I don't need any other parts at the moment and can't make the minimum Moss order. I guess that I can load up on things that I may need in the future...

     Does anyone have a spare laying around? The disk wheel studs have 16 or 17 threads on the outside. The wire wheel studs have about 12.

     -Bill Brewer




On 6/1/2022 10:58 AM, William Brewer wrote:
     I just snapped off a rear wheel stud on my TR3. It twisted and snapped about 3 threads into the rear axle flange. Question: With the studs out is it a through hole to the back of the axle flange or is it a bottomed hole? I need to get an EZ-out in there and want to make sure that it is okay to drill straight through.

     Also, does anyone have a TR3 or TR4 disk wheel stud that they can spare that they can give/sell me?

     Thanks,

     -Bill Brewer

     Morro Bay, CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220602/6ab38f81/attachment.htm>