[TR] Voltage stabilizer

[Dave Connitt]

The B post is the battery input. I just finished a updated version based on the TI LM2940T low dropout 10 volt regulator. I bought 50 printed circuits. Anybody interested in one?
Dave Connitt

Sent from my iPhone

> On Jul 8, 2022, at 10:15 PM, David Friedlander <forzion7 at gmail.com> wrote:
> 
> 
> Ed;
> 
> I believe the B post on the stabilizer is for the ground wire. A test lead can easily be connected to it and grounded without the need to screw it down.
> 
> Dave
> 
>> On Fri, Jul 8, 2022 at 6:34 PM Edward Hamer <hdrider570 at att.net> wrote:
>> Voltage stabilizers need to be screwed down so make the ground connection.  I like to use a star washer between the mounting tab and the car body.
>> 
>> Edward Hamer
>> Sent from my T-Mobile 5G Device
>> Get Outlook for Android
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220708/6f4353b0/attachment.htm>