[TR] Incantation

[Frank Fisher]

 then it should go right back in with just a little swearing in the ancient language
frank
    On Thursday, November 11, 2021, 03:15:29 PM PST, David Friedlander <forzion7 at gmail.com> wrote:  
 
 Do I need to align the clutch disc to the pilot bushing ifI never disassembled the clutch? I only worked on the gearbox, not the clutch....
Dave
On Thu, Nov 11, 2021 at 5:57 PM TeriAnn J. Wakeman <tjwakeman at gmail.com> wrote:

  On 11/11/21 1:30 PM, David Friedlander wrote: 
  You used a clutch disc centering tool to align the clutch disc to the pilot bushing .. right? And maybe just a thin smear of grease on the leading edge of the  gearbox gears?  You have the bottom of the bellhousing sitting on a 2X4 over the crossmember. Otherwise just try to line it up as best as possible (It helps to have you looking down and a second person looking at the side). have the gearbox in 4th gear & when the shaft & disc splines touch, wiggle the rear output shaft a little to get the splines lined up. Maybe putting out a wee dram of Baleys the night before can't hurt and you can finish off whatever is left after the spline slides in. 
  TeriAnn
  
  On what page of the manual is the incantation to speak over this effort?  
 Must be spoken with a Limey accent, right?  :- ) 
 Dave '59 TR3A  
 
 
 -- 
 
Book - The Essential Guide to Overland Travel in the United States and Canada 
 2 years to write and 38 years of travel and camping to learn what to write
 
 Because the world beckons and life waits for no one
  ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211111/bb253390/attachment.htm>