[TR] Incantation

[David Friedlander]

Do I need to align the clutch disc to the pilot bushing if
I never disassembled the clutch? I only worked on the
gearbox, not the clutch....

Dave

On Thu, Nov 11, 2021 at 5:57 PM TeriAnn J. Wakeman <tjwakeman at gmail.com>
wrote:

> On 11/11/21 1:30 PM, David Friedlander wrote:
>
> You used a clutch disc centering tool to align the clutch disc to the
> pilot bushing .. right? And maybe just a thin smear of grease on the
> leading edge of the  gearbox gears?  You have the bottom of the bellhousing
> sitting on a 2X4 over the crossmember. Otherwise just try to line it up as
> best as possible (It helps to have you looking down and a second person
> looking at the side). have the gearbox in 4th gear & when the shaft & disc
> splines touch, wiggle the rear output shaft a little to get the splines
> lined up. Maybe putting out a wee dram of Baleys the night before can't
> hurt and you can finish off whatever is left after the spline slides in.
>
> TeriAnn
>
> On what page of the manual is the incantation to speak over this effort?
> Must be spoken with a Limey accent, right?  :- )
>
> Dave
> '59 TR3A
>
>
> --
>
> Book - The Essential Guide to Overland Travel in the United States and
> Canada <http://overlandtravel.us>
> 2 years to write and 38 years of travel and camping to learn what to write
>
> *Because the world beckons and life waits for no one*
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211111/8703bd78/attachment.htm>