[TR] TR3 O/D Solenoid plate

[Art McEwen]

Btw any idea of the torque for the nuts/bolts on the solenoid plate?

> On Jul 15, 2021, at 1:54 PM, Art McEwen <artwmcewen at gmail.com> wrote:
> 
> 
> Thanks!
> 
> Art
> 
>> On Thu, Jul 15, 2021, 11:25 AM DAVID MASSEY <dave1massey at cs.com> wrote:
>> Nothing will go sproing but you will likely loose your solenoid adjustment.  Not a big deal as adjusting is pretty simple.
>> 
>> Dave 
>> 
>> 
>> 
>> -----Original Message-----
>> From: Art McEwen <artwmcewen at gmail.com>
>> To: triumphs at autox.team.net
>> Sent: Thu, Jul 15, 2021 9:48 am
>> Subject: [TR] TR3 O/D Solenoid plate
>> 
>> It's weeping oil (even more than "acceptable"), can I loosen the 4 screws to add gasket goop without misaligning the plunger/spring thingy behind it or is it safe to remove entirely while in place without something going "sprong"?
>> 
>> Thanks,
>> 
>> Art 
>> TS64???LO 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210715/850b1114/attachment.htm>